Hail storms are a destructive force of nature that can cause significant damage to a car’s roof. That causes dings and dents all over the car hood.
Hail damage on a car roof can range from minor dents to major dents or cracks. And all this destruction on a car makes it look distressing for the owners.
The good news is that it is possible to repair hail dents on a car hood. You don’t have to replace the entire roof.
However, it is critical to approach the repair process carefully to avoid causing further damage to the vehicle. But with the right tools and instructions, you can do it properly.
Repairing hail damage can be complicated, but using the appropriate methods can make it less daunting. Here we will discuss how to repair hail dents on car hoods.
Things You’ll Need
- Safety Equipment: Always use safety equipment, such as gloves and safety glasses, when working on the car roof a car.
- Paintless Dent Repair (PDR) Tools: If the hail damage is minor, you can use PDR tools to remove the dents. It has particular tools that you can use to massage out the dents.
- Body Filler: For larger dents, you may require body filler with a hardener. It is affordable and straightforward to other dent repair methods.
- Sandpaper and Primer: Sandpaper and primer are necessary to smooth out the surface of the repaired area and prepare it for paint.
- Paint: Finally, you will need the matching paint for your car to paint the repaired area.
How to Repair Hail Damage on Car Roof (Step-by-Step Guide)
When you have all the tools, get on the steps to repair your hail-damaged roof by following the below steps.
- Begin by assessing the damage on the car roof. Use a flashlight to identify the dents and dings on the surface.
- Wear your gloves and safety glasses and gather all the tools. So that later on, we don’t have to spend time moving around
- Before you start working, make sure the roof is clean. Remove any dirt or debris present on the car roof.
- Use the PDR technique to remove minor dents and dings. Place the PDR tool on the dented area and gently hammer it until it pops out.
- Repeat the process until all the depressions are removed from the car roof.
- For larger dents, apply body filler to fill the gap. Mix the body filler and hardener on a mixing board.
- Apply the mixer on the dented area by using a putty knife. Smooth it out and let it dry for several hours.
- Once the filler is dry, use sandpaper to smooth out the surface. You can also use a primer after it.
- After removing all dents, paint the repaired area. Now your car roof is all repaired and new.
Conclusion
In conclusion, repairing hail damage on a car roof is a process that requires time, patience, and attention. But the result is worthwhile.
It’s necessary to assess the roof properly and follow the steps carefully to avoid further damage to the car roof. If the damage is severe, don’t do DIYs but seek professional assistance.
But it’s better to take precautions before the damage. Always watch the weather forecast and be prepared for hail storms. Park the car in a garage or other covered area to protect it from hail. You can also use car covers.
Frequently Asked Questions (FAQs)
