How to Cover a Broken Car Window (Quick Temporary Fix)

If you have a broken car window, it can be a frustrating and potentially dangerous situation. Whether your car window broke because of an accident, vandalism, or extreme weather conditions, driving with it isn’t recommended.

It is crucial to fix the broken window to prevent further damage or theft. A temporary cover for broken car windows can provide a quick fix until you can repair them permanently.

Temporary covers for broken car windows can be made using plastic wrap, duct tape, or even a trash bag. Clear plastic for broken car windows is also a good idea.

Here in this article, we’ll see just that. Because further in this article, we’ve covered the materials needed, steps to take, and some safety precautions when covering a broken car window. So, let’s get into it.

How to Cover a Broken Car Window: Step-by-Step Guide

Things You’ll Need

Before you head towards the steps, get the right tools. Prepare a list of the following items for the garage hour.

  • Protective Gear: Wearing gloves and safety goggles will protect you from broken glass and debris while covering the broken car window.
  • Vacuum Cleaner: A vacuum cleaner can also be handy for cleaning up broken glass or debris before covering the window.
  • Clear Plastic: You will need a transparent plastic sheet, such as a trash bag, shower curtain, or plastic wrap, to cover the window. Ensure it’s large enough to cover the entire window and secure it in place.
  • Heavy-Duty Tape: Heavy-duty tape, such as duct tape, helps secure the plastic. You can also use masking or painter’s tape, but they may need to be stronger than duct tape.
  • Scissors Or A Knife: You may need to cut the plastic to fit the size and shape of the broken car window, so having a pair of scissors or a knife on hand is essential.
  • Microfibre Towel: You’ll need a few microfiber towels to clean dirt from the window frame.
See also  How to Fix Burn Hole in Car Seat — Detailed Guide

Steps for Covering a Broken Car Window

Once you get all the tools, let’s temporarily cover your broken window. Here’s a step-by-step guide on how to cover a broken car window:

  1. Before you begin, wear gloves and safety goggles to protect yourself from broken glass shards.
  1. Remove any broken glass from the window frame, ensuring you don’t leave any sharp pieces behind.
  1. Vacuum the car interior to ensure that there are no remaining glass pieces.
  1. Clean the window frame with a microfiber towel to remove dirt.
  1. Then measure the window size to determine how much plastic sheeting you’ll need to cover the window. Make sure to add a few inches to your measurements to ensure that the entire window is covered.
  1. Cut the plastic sheeting or cardboard according to the window size using scissors or a knife.
  1. Secure the plastic sheeting to the window frame using duct tape. Be sure to seal all the edges and corners properly to prevent wind or rain from entering.
  1. Once the cover is attached, reinforce it with additional duct tape around the edges and corners to ensure it stays in place.
  1. Check the repair to ensure it’s secure and accurately covering the broken window. If necessary, make any additional adjustments.

Conclusion

Covering a broken car window is a temporary solution that can help protect your car until you get a permanent fix. Although there are various methods for covering a broken car window, we’ve covered an easy DIY method that takes no time.

However, don’t just rely on this temporary fix. Getting it repaired as soon as possible is recommended to prevent further damage to your vehicle or potential safety risks.

See also  How to Reset Mass Air Flow Sensor (The 3 Effective Methods)

Frequently Asked Questions (FAQs)



More on Vehicle Guides